Pink® Batts® Tips for Comfy Living – Warm, Dry, Quiet
When building, it’s wise to start off on the right foot. Our comprehensive range of products provides performance that meets or exceeds the minimum building code recommendations – which is really important.
 |
Pink® Batts® Ultra™ premium thermal insulation helps maintain a comfortable internal temperature in your home. |
- Pink® Batts® Ultra™ can significantly reduce heat loss in winter and heat gain in summer, and help your home remain at a more even temperature.
- Pink® Batts® Ultra™ can pay for itself over time from the savings on energy bills.
- Pink® Batts® Ultra™ can help reduce condensation and stop mould growing on the inside of your walls and ceilings to create a much healthier home.
- Pink® Batts® Ultra™ is non-combustible when tested to CSIRO AS1530.1 – it simply will not burn.
- Research shows depending on house type, location and materials, it can save energy bills by up to 49% compared to no insulation and 17% compared to the building code minimum levels of insulation.
- With a 50 year durability statement and BRANZ appraisal, Pink® Batts® Ultra™ can be trusted to perform over time.
- Pink® Batts® Ultra™ has been awarded the Environmental Choice accreditation www.enviro-choice.org.nz and is made from 75% recycled glass.
 |
 |
Pink® Batts® Barriers wrap your home in a protective envelope as a secondary defense against water, moisture and air infiltration. |
- Relevant products assist in meeting the requirements of E2/AS1, and are BRANZ appraised for added peace of mind.
- The range features Tyvek Weatherization system, Frameguard® II, Weatherseal Flexible Flashing tape, Flamestop, Sisalation and more.
- The Tyvek® Weatherization System comprises of three components to help your house manage water and moisture more effectively by sealing the outer frame of your home. Properly installed the system let’s water vapor generated inside your house escape and acts as a barrier to wind –driven rain.
 |
Pink® Batts® Silencer® acoustic insulation when combined with other measures, effectively reduces noise transmission between rooms. |
- Strategic use of acoustic insulation is an essential part of modern living. As the best chance to insulate correctly is at the building stage, it is important to choose materials, such as Pink® Batts® Silencer®, that will perform well, not just initially, but in the long term.
- By installing non-combustible Pink® Batts® Silencer® in interior wall cavities and Pink® Batts® Silencer ® Midfloor between floors/ceilings in multi-story dwellings, the amount of unwanted noise will be reduced significantly.
- An STC of 47 can be achieved with Pink® Batts® Silencer® as part of the GIB Quiet Zone Specification
- Use Pink® Batts® Silencer® to isolate noise within the home such as bathrooms next to living areas and laundries next to bedrooms.
 |
To help make installation of the Pink® Batts® range of products easier, Tasman Insulation have a professional installation service available to homeowners and builders. |
- The neater the fit of the insulation, the better the insulation performance and the more comfortable the home.
- A gap in the insulation of as little as 10mm can reduce the effectiveness of the insulation by up to 50%.
- PinkFit® are installation specialists teat ensure the Pink® Batts® are installed correctly with no gaps or folds.
- PinkFit® provide a guarantee of workmanship at the completion of every installation.
See also Ten Common Questions on Insulation
